TM 5-2420-231-23-3
0297
REMOVAL CONTINUED
7. Remove bolt (Figure 4, Item 3), washer (Figure 4, Item 4), and clamp (Figure 4, Item 5) from mounting plate
(Figure 4, Item 13).
8. Remove nut (Figure 4, Item 9), washer (Figure 4, Item 10), clamp (Figure 4, Item 11), and spacer (Figure 4,
Item 12) from mounting plate (Figure 4, Item 13).
9. Remove two capscrews (Figure 4, Item 1) and bracket (Figure 4, Item 2) from mounting plate
(Figure 4, Item 13).
10. Position hydraulic tube assembly (Figure 4, Item 6) aside.
11. Remove bolt (Figure 4, Item 7), convex washer (Figure 4, Item 8), nut (Figure 4, Item 14), convex washer
(Figure 4, Item 15), and mounting plate (Figure 4, Item 13) from backhoe dipper support arm
(Figure 4, Item 16).
Figure 4. Hydraulic Line Assembly.
0297
12. Push coupler pins (Figure 5, Item 3) inward.
13. Remove two locking rings (Figure 5, Item 2) from backhoe dipper support arm (Figure 5, Item 1).
Figure 5. Coupler Pin Locking Ring.
0297
