TM 5-2420-231-23-3
0337
REMOVAL CONTINUED
5. Disconnect windshield washer pump inlet hose (Figure 2, Item 8) from windshield washer reservoir
(Figure 2, Item 1).
6. Remove tiedown strap (Figure 2, Item 10) and windshield washer pump (Figure 2, Item 9) from windshield
washer reservoir (Figure 2, Item 1). Discard tiedown strap.
7. Remove bolt (Figure 2, Item 2), washer (Figure 2, Item 3), two washers (Figure 2, Item 4), clamp (Figure 2,
Item 5), locknut (Figure 2, Item 6), and windshield washer reservoir (Figure 2, Item 1) from engine coolant res-
ervoir bracket (Figure 2, Item 7). Discard locknut.
Figure 2. Windshield Washer Reservoir.
0337
END OF TASK
CLEANING AND INSPECTION
0337
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0337
NOTE
Route and install windshield washer hoses as noted during removal.
1. Install windshield washer reservoir (Figure 2, Item 1), bolt (Figure 2, Item 2), washer (Figure 2, Item 3), two
washers (Figure 2, Item 4), clamp (Figure 2, Item 5), and new locknut (Figure 2, Item 6) on engine coolant res-
ervoir bracket (Figure 2, Item 7).
2. Install windshield washer pump (Figure 2, Item 9) and new tiedown strap (Figure 2, Item 10) on windshield
washer reservoir (Figure 2, Item 1).
3. Connect windshield washer pump inlet hose (Figure 2, Item 8) to windshield washer reservoir
(Figure 2, Item 1).
