TM 5-2420-231-23-3
0353
REMOVAL
0353
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark all lines to aid in installation.
1. Slide four hose clamps (Figure 1, Item 2) to center of two heater hoses (Figure 1, Item 3).
2. Disconnect two heater hoses (Figure 1, Item 3) from blower assembly (Figure 1, Item 1).
3. Disconnect two heater hoses (Figure 1, Item 3) from heater tubes (Figure 1, Item 4).
4. Remove two bolts (Figure 1, Item 6) and holding bracket (Figure 1, Item 5) from heater tubes (Figure 1, Item 4).
Figure 1. Blower Housing Connection.
0353