TM 5-2420-231-23-3
0354
REMOVAL CONTINUED
19. Remove nut (Figure 7, Item 2), spacer (Figure 7, Item 3), heater tubes (Figure 7, Item 1), bolt (Figure 7,
Item 4), and bracket (Figure 7, Item 5) from machine.
Figure 7. Bolt and Spacer.
0354
END OF TASK
CLEANING AND INSPECTION
0354
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0354
NOTE
Remove plugs and caps from lines and fittings.
Install lines as tagged and marked during removal.
Install tiedown straps as noted during removal.
Route lines as noted during removal.
1. Install spacer (Figure 7, Item 3), heater tubes (Figure 7, Item 1), bracket (Figure 7, Item 5), bolt (Figure 7,
Item 4), and nut (Figure 7,Item 2) on machine.
