TM 5-2420-231-23-3
0357
REMOVAL CONTINUED
NOTE
Note position of cable and retaining clip prior to disassembly.
3. Remove retaining clip (Figure 2, Item 4) from heater control valve (Figure 2, Item 1).
4. Disconnect cable (Figure 2, Item 3) from heater control valve lever (Figure 2, Item 2) and remove cable from
machine.
Figure 2. Heater Control Valve Connection.
0357
END OF TASK
CLEANING AND INSPECTION
0357
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0357
NOTE
Install cable and retaining clip as noted during disassembly.
1. Connect cable (Figure 2, Item 3) to heater control valve lever (Figure 2, Item 2).
2. Install retaining clip (Figure 2, Item 4) on heater control valve (Figure 2, Item 1).
