TM 5-2420-231-23-3
0363
REMOVAL CONTINUED
4. Remove O-ring (Figure 2, Item 1) from A/C hose (Figure 2, Item 2). Discard O-ring.
Figure 2. O-Ring.
0363
END OF TASK
CLEANING AND INSPECTION
0363
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0363
WARNING
Refrigerant oil is slippery. Wipe up any spills immediately. Failure to follow this warning
may result in injury to personnel.
NOTE
A/C O-rings are lubricated with refrigerant oil prior to assembly.
1. Lubricate new O-ring (Figure 2, Item 1) with refrigerant oil from a sealed container and install O-ring on A/C
hose (Figure 2, Item 2).
