TM 5-2420-231-23-3
0367
CLEANING AND INSPECTION
0367
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0367
1. Install A/C compressor belt (Figure 2, Item 9) on engine drive pulley (Figure 2, Item 8) and A/C compressor
pulley (Figure 2, Item 7).
2. Apply tension to A/C compressor belt (Figure 2, Item 9) by pulling A/C compressor holding bracket (Figure 2,
Item 5) away from engine (Figure 2, Item 3). Tighten bolt (Figure 2, Item 1) on A/C compressor bracket
(Figure 2, Item 2).
3. Tighten nut (Figure 2, Item 4) and bolt (Figure 2, Item 6) on A/C compressor holding bracket (Figure 2, Item 5).
Figure 2. A/C Compressor Belt.
0367
