TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C - Continued.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
SERVICE
ITEM NO. INTERVAL
CAPABLE IF:
PROCEDURE
Before
Transmission Oil
CAUTION
14
Level
(Cont.)
If transmission oil level is above "H" mark. Notify Field
Maintenance. Too much oil in transmission will cause aeration
of oil. Failure to follow this caution will result in damage to
equipment.
i. Install transmission oil level gauge
and tighten.
Figure 7. Transmission Oil.
0013
ARTICULATION
AREA
Before
Articulation Pivot a. Wipe grease fittings clean with a
15
Lubrication
rag.
b. Apply GAA grease to fittings (two
Upper and lower articulation
pin/bearing assemblies are
fittings at each pivot point). Wipe off
cracked, have breaks, loose
excess grease from fittings.
or missing mounting bolts, or
damaged or missing grease
fittings.
0013-12
