TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
ITEM NO. INTERVAL
CAPABLE IF:
SERVICE
PROCEDURE
Semiannually Engine Coolant
CAUTION
30
System Service
(Cont.)
Do not add coolant into the radiator of an overheated engine.
Allow engine to cool. Failure to follow this warning may cause
damage to equipment.
m. Fill cooling system slowly. This
Class III
coolant
leak
is
allows more air to escape and system evident.
to be filled to maximum capacity. Refer
to Table 7, Coolants, in this work
package for type and mixture of
coolant.
NOTE
Use only a corrosion inhibitor that is compatible with aluminum.
DO NOT use inhibitors labeled as "acid neutralizers".
n. Start engine and run until normal
operating temperature is reached,
adding coolant when needed to keep
proper level of 1 in. (25 mm) above
baffle.
o. After all air is removed and level
remains fixed, install radiator cap.
Check all drains for leakage.
a. Start engine and operate boom,
Class III oil leak is evident.
Semiannually Hydraulic
31
bucket, and steering until hydraulic oil
Reservoir Oil
reaches operating temperature
Draining
b. Park loader on level ground
c. Raise bucket completely and roll
bucket back all the way (WP 0005).
WARNING
Do not allow anyone under boom and bucket while in raised
position. Failure to comply may cause injury or death to
personnel and damage to equipment.
d. Shut engine down and apply
parking brake (WP 0005).
0018-45