TM 5-3805-255-14
0022
REMOVAL CONTINUED
NOTE
Tag and identify all wires and hoses to aid in installation.
6. Disconnect battery cables from starter, beginning with ground cable (WP 0041). Pull battery cables out of
engine compartment.
NOTE
Tag and identify all hoses prior to removal to aid in installation.
Plug all hoses and open ports to prevent contamination and leaks.
7. Disconnect ether supply line (Figure 1, Item 1) at thermal shut-off valve (Figure 1, Item 2) at rear of water
manifold (Figure 1, Item 3).
Figure 1. Ether Supply Line.
022
0022-2