TM 5-3805-255-14
0044
INSTALLATION CONTINUED
Fuel Level Sending Unit
WARNING
Use suitable container when draining fuel. Fuel may explode if subject to sources of
ignition. Failure to follow this warning may result in injury or death to personnel. In event of
exposure or injury cleanse affected area with soap and water. For eyes flush eyes with
water.
1. Install fuel level sender (Figure 6, Item 1), new gasket (Figure 6, Item 2), cover (Figure 6, Item 3), and four
bolts (Figure 6, Item 4) in fuel tank (Figure 6, Item 17).
WARNING
Use extreme caution when handling heavy components. Provide adequate support and
use assistance during procedure. Ensure that any lifting equipment used is in good
condition and of suitable load capacity. Keep clear of heavy parts supported by lifting
equipment. Failure to follow this warning may result in injury or death to personnel.
2. Using a suitable lifting device, align fuel tank (Figure 6, Item 17) with frame mounting brackets.
3. Install 12 washers (Figure 6, Items 14 and 15), six bolts (Figure 6, Item 13), and nuts (Figure 6, Item 16)
through frame mounting brackets.
4. Install U-bolt (Figure 6, Item 7), two washers (Figure 6, Item 8), nuts (Figure 6, Item 9), and oil drain hose (Fig-
ure 6, Item 6) on fuel tank (Figure 6, Item 17).
5. Attach fuel supply hose (Figure 6, Item 10) and return hose (Figure 6, Item 11) to fuel tank (Figure 6, Item 17).
6. Connect wire (Figure 6, Item 5) to fuel level sender (Figure 6, Item 1).
7. Install two drain plugs (Figure 6, Item 12) in fuel tank (Figure 6, Item 17).
0044-8
