TM 5-3805-255-14
0044
REMOVAL CONTINUED
Water Temperature Sending Unit
00044
NOTE
Allow engine to cool before performing this procedure
Relieve cooling system pressure by removing radiator cap before beginning.
Place suitable container under engine to catch coolant as sending unit is removed.
1. Remove nut (Figure 2, Item 2), washer (Figure 2, Item 3), and wire eyelet (Figure 2, Item 4) from water
temperature sending unit (Figure 2, Item 1).
2. Remove water temperature sending unit (Figure 2, Item 1) from water manifold (Figure 2, Item 5).
Figure 2. Water Temperature Sending Unit.
044
0044-4