TM 5-3805-255-14
0061
ASSEMBLY CONTINUED
7. Install new seal (Figure 13, Item 3) on valve (Figure 13, Item 2). Install primary inlet spring (Figure 13, Item 4)
on valve.
8. Install new seals (Figure 13, Items 5 and 7) on primary inlet valve guide (Figure 13, Item 6). Install primary inlet
valve guide in upper valve body (Figure 13, Item 1).
Figure 13. Valves.
0061
9. Install push rod guide (Figure 14, Item 6) and push rod (Figure 14, Item 5) in upper valve body (Figure 14,
Item 4).
10. Align previously made marks and install lower valve body (Figure 14, Item 7) on cover (Figure 14, Item 3) and
upper valve body (Figure 14, Item 4). Install four new lockwashers Figure 14, Item 2) and bolts (Figure 14,
Item 1).
Figure 14. Push Rod.
0061
11. Install new O-ring (Figure 15, Item 2) on piston (Figure 15, Item 1).
12. Install spring (Figure 15, Item 3), retainer (Figure 15, Item 4), and retaining ring (Figure 15, Item 5) in piston
(Figure 15, Item 1).
0061-12
