TM 5-3805-255-14
0069
REMOVAL CONTINUED
1. Remove locknut (Figure 1, Item 2) and washer (Figure 1, Item 3) from drag link (Figure 1, Item 5) on lever arm
(Figure 1, Item 4). Discard locknut.
2. Remove cotter pin (Figure 1, Item 10) from tie-rod end (Figure 1, Item 13). Discard cotter pin.
3. Loosen plug (Figure 1, Item 11) until ball-stud (Figure 1, Item 12) on steering gear (Figure 1, Item 9) clears
large opening in tie-rod end (Figure 1, Item 13). Remove drag link (Figure 1, Item 17) from loader.
4. Remove locknut (Figure 1, Item 6), bolt (Figure 1, Item 8), bushing (Figure 1, Item 20), and steering rod
(Figure 17) from lever arm (Figure 1, Item 4). Discard locknut.
5. Remove bolt (Figure 1, Item 16), locknut (Figure 1, Item 14), and steering rod (Figure 1, Item 7) from steering
front end (Figure 1, Item 15). Discard locknut.
6. Remove nut (Figure 1, Item 18) flat washer (Figure 1, Item 19), and lever arm (Figure 1, Item 4) from pivot
plate (Figure 1, Item 1).
7. Remove three bolts (Figure 1, Item 22), lockwashers (Figure 1, Item 23), and washers (Figure 1, Item 24) from
pivot plate (Figure 1, Item1). Discard lockwashers.
8. Remove bearing (Figure 1, Item 21) from lever arm (Figure 1, Item 4).
0069-2
