TM 5-3805-255-14
0069
DISASSEMBLY
00069
1. Loosen nut (Figure 3, Item 10) on clamp assembly (Figure 3, Item 2) and remove tie-rod end (Figure 3, Item 3)
from drag link (Figure 3, Item 1).
2. Remove grease fitting (Figure 3, Item 8) from plug (Figure 3, Item 9).
3. Remove plug (Figure 3, Item 9) from tie-rod end (Figure 3, Item 3).
4. Remove two ball-stud seats (Figure 3, Item 7), spring (Figure 3, Item 6), safety plug (Figure 3, Item 5), and
seat (Figure 3, Item 4) from tie-rod end (Figure 3, Item 3).
Figure 3. Tie-Rod End.
0069
END OF TASK
CLEANING AND INSPECTION
00069
Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
END OF TASK
0069-5