TM 5-3805-255-14
0069
ASSEMBLY
00069
NOTE
Assembly is for both tie-rod ends.
1. Install seat (Figure 4, Item 4), safety plug (Figure 4, Item 5), spring (Figure 4, Item 6), two ball-stud seats
(Figure 4, Item 7), and plug (Figure 4, Item 9) into tie-rod end (Figure 4, Item 3).
2. Grease ball-stud seats (Figure 4, Item 7).
NOTE
DO NOT compress spring.
3. Tighten plug (Figure 4, Item 9) one to two turns.
4. Install grease fitting (Figure 4, Item 8) in plug (Figure 4, Item 9).
5. Install tie-rod end (Figure 4, Item 3) in drag link (Figure 4, Item 1).
6. Do not tighten nut (Figure 4, Item 10) on clamp assembly (Figure 4, Item 2) at this time.
H100C-0446
Figure 4. Tie-Rod End.
0069
END OF TASK
0069-6