TM 5-3805-255-14
0070
INSTALLATION
00070
CAUTION
Ensure splined shafts are not damaged when removing from converter. Failure to follow
this caution may result in damage to equipment.
1. Install steering pump (Figure 1, Item 9) on converter.
2. Install two new lockwashers (Figure 1, Item 11) and bolts (Figure 1, Item 10) on converter.
3. Install new O-ring (Figure 1, Item 8), hydraulic line (Figure 1, Item 6), two split flanges (Figure 1, Item 7), and
four bolts (Figure 1, Item 5) on steering pump (Figure 1, Item 9).
4. Install new O-ring (Figure 1, Item 4), hydraulic line (Figure 1, Item 1), two split flanges (Figure 1, Item 3), and
four bolts (Figure 1, Item 2) on steering pump (Figure 1, Item 9).
END OF TASK
END OF WORK PACKAGE
0070-3/(4 blank)
