6
TM 5-3805-255-14
FIELD MAINTENANCE
-
STEERING CYLINDER REPLACEMENT
00
71
Removal, Installation
INITIAL SETUP
Personnel Required
Tools and Special Tools
0
0
Tool Kit, General Mechanic's, Automotive (WP
Two
0
0128, Item 20)
0
Equipment Condition
0
Materials/Parts
Machine parked on level ground (WP 0005)
0
0
Cap Set, Protective Dust and Moisture Seal
Parking brake applied (WP 0005)
0
(WP 0130, Item 3)
Engine OFF (WP 0005)
0
0
Oil, Lubricating, OE/HDO-10 (WP 0130, Item
Battery disconnect switch in OFF position (WP
22)
0
0
Rag, Wiping (WP 0130, Item 28)
Safety bar installed (WP 0005)
0
0
Tag, Marker (WP 0130, Item 37)
Wheels chocked
0
0
REMOVAL
00071
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut
down and hydraulic system pressure has been relieved.
Escaping hydraulic fluid under pressure can penetrate the skin, causing injury to
personnel.
When disposing of hydraulic fluid, consult your unit/local hazardous waste disposal center
or safety office for local regulatory guidance.
Lubricating/hydraulic oils can be very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury to personnel.
NOTE
This work package describes procedure and materials/parts for one cylinder. Tag and
identify cylinder prior to removal. Do not damage pivot bushings and pinlocks during
removal. Tag and identify all hose flanges for ease of installation and to protect and
identify for assembly. Cap all hose flanges to prevent contamination and leaks.
0071-1
