TM 5-3805-255-14
0075
REMOVAL CONTINUED
10. Remove two pins Figure 5, Item 2) and control rod (Figure 5, Item 4) from boom stop positioner control
Figure 5, Item 3) and boom (Figure 5, Item 1).
Figure 5. Control Rod.
0075
NOTE
Tag and identify all air lines to aid in installation.
Note and identify routing of air lines prior to removal from loader to aid in installation
11. Disconnect three air lines Figure 6, Item 7) from boom stop positioner control (Figure 6, Item 1).
12. Remove two nuts (Figure 6, Item 6), lockwashers (Figure 6, Item 5), bolts (Figure 6, Item 4), washers (Figure 6
Item 3), and boom stop positioner control (Figure 6, Item 1) from side wall of cab (Figure 6, Item 2). Discard
Figure 6. Boom Stop Positioner Control.
0075
0075-5
