TM 5-3805-255-14
0077
REMOVAL
00077
1. Disconnect line from hydraulic tank (WP 0083).
2. Remove eight bolts (Figure 1, Item 2) and four split flanges (Figure 1, Item 3) from main hydraulic pump
(Figure 1, Item 5).
3. Remove two hydraulic lines (Figure 1, Item 1) and O-rings (Figure 1, Item 4) from main hydraulic pump (Figure
1, Item 5). Discard O-rings.
4. Remove two bolts (Figure 1, Item 6) and lockwashers (Figure 1, Item 7) from main hydraulic pump (Figure 1,
Item 5). Discard lockwashers.
NOTE
Be sure splined shaft is not damaged when removing from converter. Cap main hydraulic
pump ports before cleaning exterior.
5. Remove main hydraulic pump (Figure 1, Item 5) from converter.
Figure 1. Main Hydraulic Pump.
0077
END OF TASK
0077-2