TM 5-3805-255-14
0089
DISASSEMBLY
00089
Valve Lever and Shaft Assembly
00089
1. Remove six valve lever adjusting screws (Figure 9, Item 5) and nuts (Figure 9, Item 6) from rocker levers
(Figure 9, Item 3).
2. Remove five roll pins (Figure 9, Item 2) from brackets (Figure 9, Items 1, 8, and 9) and slide end brackets off of
shaft (Figure 9, Item 4).
3. Remove brackets (Figure 9, Item 9), six rocker levers (Figure 9, Item 3), and three bushings (Figure 9, Item 7)
from shaft (Figure 9, Item 5).
4. Repeat steps 1 through 3 to disassemble valve lever assembly on other cylinder head.
Figure 9. Valve Lever Assembly.
0089
0089-10