TM 5-3805-255-14
0089
INSTALLATION CONTINUED
18. Install new valve housing gasket (Figure 29, Item 7) and valve cover housing (Figure 29, Item 1) on cylinder
head.
19. Install six flat washers (Figure 29, Item 3) and bolts (Figure 29, Item 2) on valve cover housing (Figure 29,
Item 1).
20. Install ten valve housing clamps (Figure 29, Item 6), new lockwashers (Figure 29, Item 5), and bolts (Figure 29,
Item 4) on valve cover housing (Figure 29, Item 1).
21. Torque valve housing cover bolts (Figure 29, Item 2) to 55 lb-ft (75 Nm).
22. Torque bolts (Figure 29, Item 4) to 20 lb-ft (27 Nm) for aluminum clamps or 35 lb-ft (47 Nm) for gray iron.
Figure 29. Valve Housing Cover.
0089
23. Install fuel return and supply tubes (WP 0030).
0089-29