TM 5-3805-255-14
0093
INSTALLATION CONTINUED
6. Align rod bolts on either side of crank shaft journal and tap piston until connecting rod (Figure 12, Item 1) and
upper bearing assembly (Figure 12, Item 2) are seated on crankshaft (Figure 12, Item 6).
7. Install lower bearing insert (Figure 12, Item 5) on bearing cap (Figure 12, Item 4).
8. Install bearing cap (Figure 12, Item 4), and two new elastic stop safety nuts (Figure 12, Item 3) on rod bolts.
Torque nuts to 150 lb-ft (204 Nm).
Figure 12. Connecting Rod Cap Installation.
0093
0093-13
