TM 5-3805-255-14
0095
REMOVAL
00095
1. Install valve spring compressor over spring (Figure 1, Item 3) and compress.
2. Remove valve keepers (Figure 1, Item 5) from groove on valve stem (Figure 1, Item 6).
3. Depress valve spring compressor and remove valve rotator (Figure 1, Item 4), spring (Figure 1, Item 3), and
spring seat (Figure 1, Item 2) from cylinder head (Figure 1, Item 1).
4. Remove valve stem (Figure 1, Item 6) from rear of cylinder head (Figure 1, Item 1).
5. Repeat steps 1 through 4 to remove all valve stems (Figure 1, Item 6) from cylinder head (Figure 1, Item 1).
Figure 1. Removing, Valves, Springs, Rotators, Seats, and Keepers.
0095
END OF TASK
0095-2