TM 5-3805-255-14
0102
ASSEMBLY CONTINUED
46. Install retaining shim pack (Figure 51, Item 4) on end of output shaft (Figure 51, Item 5).
47. Install retaining washer (Figure 51, Item 3) with capscrews (Figure 51, Item 1) and new lock plate (Figure 51,
Item 2). Tighten capscrews hand tight.
Figure 51. Shim Pack Installation.
0102
48. Use a feeler gauge to measure clearance between lower surface of retaining washer (Figure 52, Item 1) and
drive housing bearing inner race (Figure 52, Item 2).
Figure 52. Clearance Measurement.
0102
0102-31