Figure 142
Figure 145
Install oil seal retainer ring.
Install oil seal retainer ring.
Figure 146
Figure 143
Install poppet balls and poppet springs in drilled ports
Install speed selector valve in housing. Install selector
in control cover. Install control cover plate. Secure with
valve stop washer and oil seal on selector valve.
bolts and external shake proof washers. Tighten 10 to
15 ft. lbs. torque [1,4 - 2,0 m.kg].
Figure 147
Using new control valve to case"O" rings and new
Figure 144
gasket, install control cover assembly on transmission
Apply a light coat of Permatex No. 2 on the outer
case. Secure with bolts and lockwashers. Tighten 20
diameter of a new selector valve oil seal. Install oil
to 25 ft. lbs. torque [2,8-3,4 m.kg]
seal in housing.
-44-
