Figure 121
With new gasket in position, install 1st and 2nd clutch
cover.
Figure 118
Compress clutch disc end plate and install end plate
retainer ring.
Use the same procedure to assemble all the clutches.
Figure 122
Install clutch cover bolts and tighten 20 to 25 ft. lbs.
torque [2,8-3,4 m.kg].
Figure 119
Install input flange, flange "O" ring, flange washer
and flange nut.
Figure 120
Figure 123
lock gears with a soft bar and tighten input flange nut
Install input, reverse, 3rd and 4th clutch supports.
150 to 175 ft. lbs. torque [20,7-24,1 m.kg].
-40-
