Figure 113
Install clutch disc hub in clutch drum.
Figure 116
Install one steel disc in clutch drum. NOTE: The steel
disc has teeth missing on the outer diameter. This is
to allow passage for the clutch release springs. Insert
two or more release springs in drum and against the
teeth of the clutch piston. Install next friction disc.
Alternate clutch discs, steel against friction and always
align the teeth on each steel disc with the teeth on the
preceding steel disc. If assembly is correct each release
spring is against a tooth on the clutch piston and you
start with a friction disc and end with a friction disc.
Insert all release springs and guide pins in clutch
drum.
Figure 114
Install disc hub retainer ring.
Figure 117
Install clutch disc end plate.
Figure 115
Install one friction disc on disc hub and against the
clutch piston.
-39-