4. Remove assembled driven clutch, spring retainer, and
Disassembly of No SPIN Differential
holdout ring from differential (Fig. 71).
1. Remove alternate differential case half bolts. Back
off remaining bolts slowly and evenly, turning each a
few turns at a time [Fig. 68). This will release spring
load of No SPIN unit.
FIG. 68.
TS-6208
5. Remove spider from differential (Fig. 72).
2. Lift off differential case half to provide access to NO-
SPIN unit (fig. 69).
FIG 69
3. Remove side gear and spring from differential (Fig.
70).
6. Remove lower assembled driven clutch, spring retainer,
and holdout ring from differential (Fig. 73).
[27]