GENERAL SERVICE INSTRUCTIONS, CALIPER DISC BRAKE
Check valve-Drill
(.794 mm) hole or remove.
Check for leakage
C h e c k valve can cause excessive brake heat or
squeal.
3 Pipe Plugs and Bleeders
1 Pistons
4 Brake Lines
2 Caps
Check master cylinders front and rear for fluid level
(make-up tank should be added to allow full lining
wear without fluid addition).
(3.175 mm) limit,
If linings are worn beyond the
the piston can pop out causing leak.
Open bleeder then push pistons back by inserting
pry bar here. This will allow new linings to be in-
stalled easily.
[3]
