TM 5-3805-258-10
Inspect the belt mounting hardware.
Replace any damaged or worn hardware.
Keep the mounting bolts tight.
To Lengthen the Belt:
With the belt unfastened, move the
anticreep slide toward the buckle.
. To remove the slack in the outer loop
rotate the buckle to free the lock
bar. This permits the belt to move
through the buckle.
Pull on the buckle until the slack is
removed from the outer belt loop.
Loosen the other half of the belt in
the same manner. Readjust the belt if it
does not fit snugly with the buckle in the
center.
27
