TM 5-3805-258-24-1
950B POWER TRAIN
SPECIFICATIONS
TRANSMISSION NEUTRALIZER GROUP
(1) Torque for four screws that fasten switches
to housing . . . . . . . . . . . . . . . . . . . . . . . . . . 0,5 t 0,1 N.m (4 f 1 Ib.in.)
TRANSFER GEARS
(OUTPUT)
Bearing Adjustments:
NOTE: Bearing arria rruat be vettical to parform
corraot adjustment.
1.
2.
(3)
(4)
Install a thickness of shims (2), as necessary, so that the end
play of gear (Lo is . . . . . . . . .
0.05 to 0.15 mm (.002 to .006 in, )
Install a thickness of shims (6), as necessary, so that the end
play of shaft (5) is . . . . . . . .
0.05 to 0.15 mm” (,002 to .006 in.)
Apply 7M7260 Liquid Gasket to seal bore surfaces in the re-
tainers before installing the seals.
Torque for two bolts . . . . . . . . . . . llrjt 10 N.m (60 f7 lb, ft. )
2-38
