TM 5-3805-258-24-1
950B POWER TRAIN
SPECIFICATIONS
DRIVE SHAFT
(Transfer Gear to Front Differential)
CAUTION
All yokee (4) muet be In alignment when the drive shafts
installad (as shown).
(1) Torque for 12 bolts that hold the
universal joint
. . . . . . . . . . . . . . . . . . .
55 ~ 7 Nom (41 ~ 5 lb. ft.)
WARNING
Seals (2) must be installed, as shown to keep grease out of
the parking brake.
(3) Torque for reteining bolt . . . . . 135+15 N.m (100 t10 lb. ft.)
are
DRIVE SHAFT
(Transfer Gear to Rear Differential)
(1) Torque for eight bolts that hold the
universal joint . . . . . . . . . . . . . . . . . . .
CAUTION
55 t 7 Nom (41 ~ 5 lb. ft.)
Align flanges with the joint ‘groups
gear when installing the flange at the rear of the transfer
in front of the transfer
2-40
