950B POWER TRAIN
TM 5-3805-258-24-1
SPECIFICATIONS
FINAL DRIVES, BRAKE AND WHEELS
(1) Torque for 15 bolts that fasten the carrier to
(5) Inside diameter of a new planet
wheel assembly . . . . . . . . . . . . . . 270 * 25 Nom (21JO* 18 lb. ft. )
gear . . . . . . . . . . . . . . . . .
51.872 f 0.010 mm (2.0422 f .0004 in.)
(2) Diameter of a new planet
(8) Steel washers must be assembled adjacent to the gear.
shafts . . . . . . . . . . . . . . .
44.318 + 0.008 mm (1.8660 t .0003 in.)
(7) Final torque after wheel bearings
(3) Torque for 20 bolts that fasten the disc to the
are adjusted . . . . . . . . . . . . . . . . . 150t20N”m (110*151b. ft.)
wheel assembly . . . . . . . . . . . . . . 270 f 25 N-m (200* 18 lb. ft.)
SEE ADJUSTMENT OF THE WHEEL BEARINGS
(4) Rubber toric seals and all surfaces in contact with them must
be clean and dry at assembly. Put a thin layer of oil on the sur-
(8) Torque for 16 bolts that fasten
faces of the metal seals that are in contact just before installa-
the brakes and spindles to the
tion. Put lubricant on all other seals at assembly.
axle housing . . . . . . . . . . . . . . . . . 475* 50 N”m(350~371b. ft.)
2-47
