T R O U B L E S H O O T I N G
TM 5-3805-258-24-1
T E S T I N G
A N D
A D J U S T I N G
21. TOO MUCH WHITE OR BLUE SMOKE
Cause
Correction
Too Much Lubrication Oil in Engine
Remove extra oil. Find where extra oil comes from. Put correct
amount of oil in engine. Do not put too much oil in engine.
Misfiring or Running Rough
Make Reference to Item 3.
Wrong Fuel Injection Timing
Make adjustment to timing.
Worn Valve Guides
Reconditioning of cylinder head is needed.
Worn Piston Rings
Install new piston rings.
Failure of Turbocharger Oil Seal
Check inlet manifold for oil and make repair to turbocharger if
necessary.
Cause
Defect in Oil Pressure Gauge
Dirty Oil Filter or Oil Cooler
Diesel Fuel in Lubrication Oil
Too Much Clearance Between
Rocker Arm Shaft and Rocker Arms
Oil Pump Suction Pipe Has A Defect
Relief Valve for Oil Pump Does Not
Operate Correctly
Oil Pump Has a Defect
22. ENGINE HAS LOW OIL PRESSURE
Too Much Clearance Between Cam-
shaft and Camshaft Bearings
Too Much Clearance Between
Crankshaft and Crankshaft Bear-
ings
Too Much Bearing Clearance for
Idler Gear
Orifices For Piston Cooling Not In-
stalled
Correction
Install new gauge.
Check the operation of bypass valve for the filter. Install new oil filter
elements if needed. Clean or install new oil cooler core. Remove dirty
oil from engine. Put clean oil in engine.
Find the place where diesel fuel gets into the lubrication oil. Make
repairs as needed. Remove the lubrication oil that has diesel fuel in it.
Install a new oil filter element. Put clean oil in the engine.
Check lubrication in valve compartment. Install new parts as
necessary.
Replacement of pipe is needed.
Clean valve and housing. Install new parts as necessary.
Make repair or replacement of oil pump if necessary.
Install new camshaft
Check the oil filter
necessary.
Inspect bearings and
Install piston cooling
and camshaft bearings if necessary.
for correct operation. Install new parts if
make replacement
orifices.
as necessary.
4-91
