TM 5-3805-258-24-1
WARNING
When using pressure air, wear a protective
face shield and protective clothing. The
maximum air pressure must be below 205
kPa (30 psi) for cleaning purposes.
WARNING
Use all cleaning solutions with care.
4. Wash the element in a clean,
nonflammable solvent. Shake or blow it dry.
5. Clean the case with a cloth, or a stiff
fiber brush.
6. Insert the element in the case.
7. Install the case and element on the
base. Tighten the retaining bolt.
8. Start the engine and check for leaks.
1-64
