INSTALL WHEEL BRAKE ASSEMBLY

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
222

TM 5-3805-258-24-2 POWER TRAIN DISASSEMBLY AND ASSEMBLY WHEEL BRAKE ASSEMBLY INSTALL WHEEL BRAKE ASSEMBLY 4255-12 Tools Needed A 6V2156 Link Bracket 2 1. Fasten tooling (A) and a hoist to the brake assembly (1) and put it into position on the axle as shown. 2. Install bolts (2) that hold brake assembly (1) to the axle. Tighten the bolts to a torque of 475 ± 50 N·m (350 ± 37 lb.ft.). 3. Connect brake line (3) to the wheel assembly as shown. 4. Loosen bolts (4) and use a feeler gauge (6) to make an adjustment of pins (5) so the distance between pins (5) and the disc is a minimum of 0.25 mm (.10 in.)and a maximum of 3 mm (.12 in.). Tighten bolts (4) to 45 ± 7 N·m (33 ± 5 lb. ft.). 5. Remove (bleed) the air from the brake system. end by: a) install tires and rims 5-176

Privacy Statement
Press Release
Contact