ASSEMBLE TRANSMISSION

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
325

POWER TRAIN TM 5-3805-258-24-2 DISASSEMBLY AND ASSEMBLY ASSEMBLE TRANSMISSION 3150-16 TRANSMISSION Tools Needed A B C D E F G H J K 1P1863 Pliers 1 5P9736 Link Bracket 3 FT833 Clamp 2 1P510 Driver Group 1 1P1684 Pliers 1 6V2156 Link Bracket 2 FT947 Clamp 2 5P4758 Pliers 1 1P520 Driver Group 1 FT834 Clutch Testing Nozzle 1 NOTE: Inspect all parts for wear or damage and make replacements if needed. Put clean power train oil on the parts at assembly. 1. Install two dowels (2) in each side of No. 1 clutch housing (1). The dowels must be in- stalled 10.5 ± .5 mm (.41 ± .020 in.)above the outside surface. 2. Heat bearing (3) to a maximum temperature of 135° C (275° F) and install it on shaft (4) as shown. 3. Install seals (5) and (6) on the shaft. 4. Carefully install shaft (4) in the No. 1 clutch housing. CAUTION Make sure the seals are not damaged when the shaft is installed in the bore of the No. 1 clutch housing. 5-279

Privacy Statement
Press Release
Contact