TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TRANSMISSION
32.
33.
34.
35.
Install retaining ring (46) in the groove of car-
rier (35).
Compress retaining ring (46) and install car-
rier (35) in gear (47) until the ring fits into the
groove in the gear.
Install carrier (35) and gear (47) on the carrier
in the No. 1 clutch housing. Make sure the gear
teeth are correctly engaged.
Use tool (A) to install ring (48) on the shaft
that holds the carrier in place.
36. Install springs (50) on rods (49) and install
them as shown.
5-284
