TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
INSTALL BUCKET POSITIONER
BUCKET POSITIONER CONTROL
CONTROL
5112-12
1. Install block (3) and magnet assembly (4) in
cover (2) with bolts(l).
2. Connect wires (5).
3. Install clip (6) that holds wires (5) together.
4. Install magnet assembly (7) in the pin and
tighten the two setscrews.
5. Put cover (2) in position on the tube assembly
and install bolts (8).
6. Make an adjustment to the bucket positioner.
See TESTING AND ADJUSTING.
5-324a
