VEHICLE SYSTEMS
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
4.
5.
6.
7.
LOADER FRAME
Use tooling (C) to install the rear bearings in
the center of the bores.
Use tooling (D) to install the lip type seals in
the bores. Seals must be installed with lip of the
seals toward the outside of the bore.
Put 5P960 Multipurpose Type Grease in all the
pin bores of the loader frame.
Put tooling (E) and loader frame (1) in posi-
tion.
8. Install rear pins (2) in the machine and the
loader frame.
9. Install the grease fittings in pins (2).
5-321
