VEHICLE SYSTEMS
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
LIFT KICKOUT CONTROL
REMOVE LIFT KICKOUT CONTROL 5109-11
1. Remove two bolts (1) and magnet assembly (2)
from the lift arms.
2. Disconnect wire (4).
3. Remove bolts (5) and holder assembly (3) from
the front main frame.
4. Remove two bolts (6) and switch assembly (7)
from the holder.
INSTALL LIFT KICKOUT CONTROL 5109-12
1. Put switch assembly (2) in position in holder
(1). Install bolts (3) that hold the switch in
place.
2. Put holder assembly in position and install bolts
(7).
3. Connect wires (6).
4. Put magnet assembly (4) in position and install
bolts (5).
5. Make an adjustment to the lift kickout. See
TESTING AND ADJUSTING.
5-323
