TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
TILT CYLINDER
CAUTION
Do not make seal (8) any larger than is neces-
sary for installation.
6. Use tool (D) to make an expansion of plastic
seal (8) that is part of seal assembly.
7. Install the seal assembly and wear ring (10) on
piston (9). Put lubricant on the seals.
8. Put piston (9) in position on the cylinder rod.
9. Put oil on the threads of the rod end.
10. Install nut (11) on the end of the cylinder rod.
5-360
