TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
LIFT CYLINDERS
6. Install rod end pins (5) in the loader frame.
7. Install the spacers, washers and bolts (6) that
hold pins (5) in place.
8. Install grease fittings (7) in pins (5).
9. Make sure the O-ring seals are in position in the
oil lines. Connect oil lines (8) to cylinder.
10. Fill the hydraulic system with oil to the correct
level.
11. Lift the loader frame and remove tooling (B)
from under the machine.
5-365
