TM 5-3805-258-24-2
VEHICLE SYSTEMS
STEERING CONTROL
ASSEMBLE STEERING
CONTROL VALVE
4102-16
1. Clean and inspect all parts. Make a replace-
ment of all parts that are worn or damaged. Put
a small amount of clean oil on all machine
surfaces and O-ring seals.
DISASSEMBLY AND ASSEMBLY
2. Install O-ring seal (1) on cover (2).
3. Install cover (2) on the valve body.
4. Put the O-ring seals in position on the seats and
plug.
5. Install seat (3), ball (4) and seat (5) in the valve
body.
6. Install plug (6) in the valve body.
7. Install O-ring seal (8) on stop assembly (7).
8. Install stop assembly (7) in the valve body.
NOTE: Steps 9 and 10 apply to models
950BNS and 950BS only.
9. Install O-ring seal (10) on plug assembly (9).
10. Install ball (12), spring (11) and plug assembly
(9) in the valve body.
11. Install shims (13), retainer (18), spacer (14),
spring (19), retainer (15), washers (20) and
bolt (16) in valve spool (17).
5-392
