TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
PILOT AND HYDRAULIC PUMP
REMOVE PILOT AND
HYDRAULIC PUMP
5073-11
start by:
a) remove seat*
*This operation is in the 950B OPERATOR’S STA-
TION, DISASSEMBLY AND ASSEMBLY sec-
tion.
WARNING
To prevent personal injury release the pres-
sure from the hydraulic system before any lines
are removed or disconnected.
1. Drain the hydraulic tank below the level of the
hydraulic pump.
2. Remove the floor panel from under the seat.
3. Remove bolts (2) and disconnect tube assembly
(1) from the bottom of the hydraulic pump.
4. Disconnect oil lines (3), (4) and (5) from the
pilot and hydraulic pump.
5. Remove bolts (6) and disconnect hose assembly
(7) from the hydraulic pump.
6. Remove bolts (9) and disconnect hose assembly
(8) from the hydraulic pump.
7. Fasten a hoist, or use two persons, to hold
pilot and hydraulic pump.
8. Remove bolts (10) and remove pilot and hy-
draulic pump (11). The weight of the pump is
60 lb. (27 kg).
5-394c/5-394d (blank)
