VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
TRANSMISSION NEUTRALIZER GROUP
Models 950BNS and 950BS
INSTALL TRANSMISSION
NEUTRALIZER GROUP
3181-12
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Put cable assembly (6) in position in transmis-
sion neutralizer (3) and install nut (5).
Install cable assembly (6) on cam (4).
Install lever (1) on cam (4),
Install lever (1) on valve spool (2).
Put transmission neutralizer group (3) and gas-
ket in position on the transmission and install
bolts (8).
Install plate (9), the gasket and screws (7) on
the neutralizer group.
Connect wire harness (11) and tube assembly
(10) to the neutralizer group.
Make an adjustment to the transmission neu-
tralizer control group. See POWER SHIFT
TRANSMISSION, TESTING AND AD-
JUSTING.
Install lower floor plate (12) on the machine
with the bolts that hold it.
Connect wire assemblies (13) and hose assem-
bly (14) to the motor.
Install the floor plate under the seat.
end by:
a) install seat (SEE OPERATOR’S STA-
TION DISASSEMBLY AND ASSEM-
BLY)
5-426
