VEHICLE SYSTEMS
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
TRANSMISSION NEUTRALIZER GROUP
DISASSEMBLE TRANSMISSION
NEUTRALIZER GROUP
3181-15
start by:
a) remove transmission neutralizer group
1. Remove housing assembly (2) and plate (1)
from the transmission neutralizer group hous-
ing.
NOTE: On models 950BNSCE and 950BSCE,
there is an O-ring on each side of plate (1).
2. Remove piston (4) from the housing assembly.
3. Remove seal (3) from the piston.
4. Remove bolts (7) and spacers. Remove spring
(5) and lever assembly (6).
5. Remove retainer ring (9) from pin (10). Make
a separation of levers (8).
6. Loosen nut (11). Remove cam (12) from the rod.
7. Remove rod (13) from the housing.
5-427
