ASSEMBLE AIR DRYER

FOOT-OPERATED BRAKE VALVES - TM-5-3805-258-24-2_513

TM-5-3805-258-24-2 Loader Scoop Type DED 4x4 Articulated Frame Steer 2 1/2 Cubic Yard Bucket (CCE) Airborne/Airmobile Sectionalized and Nonsectionalized Manual
Page Navigation
493

VEHICLE SYSTEMS 17. Remove unloader valve spring (28) and unloader valve (29). 18. Remove U-cup (30). WARNING If NBC exposure is suspected, all air filter media should be handled by personnel wearing pro- tective equipment. Consult your unit NBC Offi- cer or NBC NCO for appropriate handling or dis- posal instructions. ASSEMBLE AIR DRYER 1. Install U-cup (30), unloader valve (29), and valve spring (28) in port plug (24). 2. Screw 3. Screw 4. Screw spring seat (27) into port plug (24). tube (26) onto spring seat (27). port plug (24) into dryer body (25). 5. Install tube (23), lower filter pad (22), re- tainer screen (21) and retaining ring (20). NOTE: Both the upper and lower filter pads 6. 7. 8. 9. 10. 11. 12. must completely cover their respective retainer screens to prevent the desiccant from rubbing against the rough screen surfaces. Install oil separator pad (19), deflector plate (18), and retaining ring (17). Pour desiccant (16) into canister (9). Shake and tamp down the desiccant, Desiccant level should be filled to retaining ring (13) groove. Install cloth filter pad (15) and filter screen (14). Push screen (14) down until retaining ring (13) can be installed. Install canister sealing ring (12). Push canister (9) into dryer body (25). Install sealing rings (11) and (10) on purge plate (7). TM 5-3805-258-24-2 DISASSEMBLY AND ASSEMBLY 13. Install spring (8) and purge plate (7). 14. Install sealing washers (6) and shaft (5). 15. Install cover seal (4) and cap (3). 16. Install washer (2) and two nuts (1). 5-530c/5-430d (blank)

Privacy Statement
Press Release
Contact