OPERATOR’S STATION
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
SEAT
24. Put springs (35) in position on the suspension
group.
25. Install links (38) on each end of the link assem-
blies (36). Use a piece of pipe (37) with a 15.9
mm (.625 in. ) inside diameter approximately
12.7 cm (5 in. ) long to install the retainers on
the links.
26. Put link assembly (39) in position on the suspen-
sion group. Install the bolts that hold it.
28. If cap (40) was removed from the lever (41). Put
5H2471 General Purpose Adhesive on the lever
and install a new cap.
5-487
